@article { author = {باستانی, علیرضا and دوست‌حسینی, کاظم and نوربخش, امیر and ورشویی‌تبریزی, علی}, title = {Investigation of the effect of wood extractive and coupling}, journal = {Iranian Journal of Natural Resources (Not Publish)}, volume = {61}, number = {3}, pages = {-}, year = {2009}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In this research the effect of Paulownia fibers(Paulownia fortunei) extractive including extractive free and with extractive and three levels ( 0,1.5,2.5 percent) of coupling agent on the strength cellulosic fibers and polymer matrix (polypropylene) composite is investigated. Melt-blended method and moulded composites were produced. Then the mechanical properties of polypropylene / wood fibers composites were measured according to ASTM testing procedures. Mechanical properties were analyzed using factorial expremental with completely randomized design. The results show that the best treatment for tensile strength was the application of 2.5 percent coupling agent and extractive free fibers, But the best treatment for MOE includes using 2.5 percent coupling agent , and for Impact resistance the best results were obtained using either 1.5 and 2.5 percent of coupling agent.}, keywords = {Paulownia wood fibers,Polypropylene,Coupling agent,Extractive,Mechanical Strength}, title_fa = {بررسی تاثیر مواد استخراجی و عامل جفت‌کننده بر ویژگی‌های مکانیکی چند سازه لیف های چوب پالونیا / پلی پروپیلن}, abstract_fa = {در این بررسی اثر مواد استخراجی لیف های پالونیا (Paulownia fortunei) در دو حالت بدون مواد استخراجی و با مواد استخراجی وبهره گیری از سه سطح 0، 5/1 و 5/2 درصد ماده جفت‌کننده بر اتصال بین لیف های سلولزی وملات پلیمر پلی پروپیلن موردارزیابی قرار گرفته است. با بهره گیری از روش مخلوط سازی مذاب و قالب گیری فشاری چند سازه‌های مورد نظر ساخته شدند. آنگاه برابر باآئین نامه‌های روش آزمون ASTM ویژگی‌های مکانیکی چند سازه لیف های چوب پالونیا / پلی پروپیلن اندازه گیری شدند. و به کمک آزمون آماری فاکتوریل در قالب طرح کاملاً تصادفی، ویژگی‌های مکانیکی مورد تجزیه و تحلیل قرار گرفتند.نتایج نشان داده است که بهترین تیمار برای مقاومت کششی در حالت بهره گیری از 5/2 درصد ماده جفت‌کننده و بدون مواد استخراجی بوده است , و بهترین تیمار جهت مدول الاستیسیته کششی در حالت بهره گیری از 5/2 درصد ماده جفت‌کننده بوده است. و برای مقاومت به ضربه فاقدار بهترین تیمار در حالت بهره گیری از 5/1 و 5/2 درصد ماده جفت‌کننده بدست آمده است.}, keywords_fa = {لیف های چوب پالونیا,پلی پروپیلن,ماده جفت‌کننده,مواد استخراجی,مقاومت مکانیکی}, url = {https://ijnr.ut.ac.ir/article_27891.html}, eprint = {https://ijnr.ut.ac.ir/article_27891_b3452eb52019cdf6638ea378fb3893be.pdf} }