@article { author = {رسام, غنچه and پور, مهدی فائزی}, title = {The Use of Kraft Lignin in Fiberboard Production}, journal = {Iranian Journal of Natural Resources (Not Publish)}, volume = {57}, number = {1}, pages = {-}, year = {2004}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In this research, the effect of kraft lignin content, temperature and time of hot press on some physical and mechanical properties of wet process hardboard (S IS) made from mixed fibers of various species of Iran Fiber Company was studied. The values of 1) Kraft lignin, .precipitated from Kraft black liquor, at three levels of 0, 5 and 10 percent (based on ovendried weight), 2) press temperature at two levels of 190 and 200 degrees centigrade and 3) press time at two levels of 8 and 10 minutes were selected. Measurements of physical and mechanical properties of produced boards, including density , water absorption and thickness swelling after 24 hours of soaking, modulus of rupture, internal bond and tensile strength parallel to the surface of boards were made according to ASTM D1037, and then the results were analyzed statistically. The results in this research have indicated that the best treatment for increasing dimensional stability is using kraft lignin content of 10%, press temperature of 200 degrees centigrade and a press time of 10 minutes. 'As concerns mechanical properties, the use of Kraft lignin content of 10% without increasing temperature and press time resulted in desired bending properties, whereas use of Kraft lignin content of5% along with increasing temperature and press time resulted in improvements in internal bond and tensile strength parallel to surface of boards.}, keywords = {}, title_fa = {بررسی اثر استفاده از لیگنین کرافت در ساخت تخته فیبر}, abstract_fa = {در این تحقیق اثر مصرف لیگنین کرافت درجه حرارت و زمان پرس گرم بر برخی خواص فیزیکی و مکانیکی تخته فیبر سخت روش تر (یک رویه صاف ) که از الیاف مخلوط گونه های مورداستفاده در شرکت فیبر ایران ساخته شده است مورد بررسی قرار گرفت مقدار لیگنین به دست آمده از مایع پخت (لیکور ) سیاه کرافت در سه سطح 0.5و10 درصد (بر مبنای وزن خشک الیاف )حرارت پرس در دو سطح 190و 200 درجه سانتیگراد و زمان پرس در دو سطح 8 و 10 دقیقه به کار رفتند اندازه گیری خواص فیزیکی و مکانیکی تخته های حاصله شامل وزن مخصوص جذب آب و واکشیدگی ضخامت پس از 24 ساعت مدول گسیختگی (MOR) چسبندگی داخلی (IB) و مقاومت کششی موازی سطح مطابق با استاندارد ASTM D1037 انجام و نتایج مورد تجزیه و تحلیل آماری قرار گرفت نتایج این بررسی نشان می دهند که بهترین تیمار برای افزایش ثبات ابعاد استفاده از لیگنین به مقدار 10 درصد بدون افزایش درجه حرارت پرس به مقدار 200 درجه سانتی گراد و زمان 10 دقیقه می باشد و در مورد خواص مکانیکی مصرف لیگنین به مقدار 10 درصد بدون افزایش درجه حرارت و زمان پرس منجر به تولید تخته هایی با خواص خمشی تر مناسب تر می گردد در حالی که مصرف لیگنین به مقدار 5 درصد همراه باافزایش درجه حرارت و زمان پرس منجر به بهبود چسبندگی داخلی و مقاومت در برابر کشش موازی سطح تخته ها می گردد .}, keywords_fa = {}, url = {https://ijnr.ut.ac.ir/article_25287.html}, eprint = {https://ijnr.ut.ac.ir/article_25287_2f0d3194936869c102d0e21351bf1bb9.pdf} }