@article { author = {موسوی, سیدرضا and طالبی, خسرو ثاقب and طبری, مسعود and پورمجیدیان, محمدرضا}, title = {-}, journal = {Iranian Journal of Natural Resources (Not Publish)}, volume = {56}, number = {1}, pages = {-}, year = {2003}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In order to determine the most appropriate gap size for improvement of natural regeneration by primary felling of the schelterwod system (preparatory and seed cuttings), 18 gaps of 1-2, 4-5 and 9-11 are (6 replications in each gap size) were selected randomly in northern aspects 1200-1400 m a.s.l., located in regeneration compartments of Seri One, in Shourab forest management plan, Golband district. Depending on their size, some 1m2 micro plats were chosen in these gaps in order to measure the frequency, height and collar diameter of the saplings regenerated after the cutting. The results showed that with increased gap size, contrary to maple (Acer velutinum), beech (Fagus orienalis Lipsky) frequency decreased. Within the investigated gaps, saplings frequency ranged between 4-9 per m2, mean height between 20-100 cm and collar diameter between 4-6 mm. In gaps of 1-2 are and 4-5 are, height and collar diameter while in gaps of 1-2 are saplings frequency were greater than those in larger gap sizes. Generally, it can be deduced that regeneration characteristics, from viewpoint of establishment and growth, are more limited in greater gaps (9-11 are) but are benefited by more favorable conditions in smaller gaps (1-2 and 4-5 are), where removal of tree elements is possible as a single tree. In deed, this research recommends that in order to improve natural regeneration, marking area must not exceed 5 are when marking is performed to remove the crown canopy, which is created by primary cuttings of the shelter wood system (preparatory and seed cuttings) and the selection system.}, keywords = {collar diameter,frequency,Gap size,height,natural regeneration,Sapling,Selection system,Shelter wood System,Beech (Fagus orientalis Lipsky)}, title_fa = {تعیین اندازه سطح حفره تاج پوشش برای بهبود زادآوری طبیعی راش}, abstract_fa = {به منظور یافتن مناسب ترین اندازه سطح حفره برای بهبود وضعیت تجدید حیات طبیعی راش به وسیله برش های اولیه پناهی (آمادگی و بذرافشانی)، 18حفره با مساحت های 2-1، 5-4 و 11-9 آر (با 6 تکرار در هر سطح حفره) به طور تصادفی در جهت شمالی ارتفاع 1400-1200 متر از سطح دریا در دانگ زادآوری سری یک طرح جنگلداری شوراب (حوزه گلبند) انتخاب شد. برای اندازه گیری فراوانی، ارتفاع و قطر یقه نهال های زادآوری شده بعد از برش، تعدادی میکروپلات یک مترمربعی درداخل این حفره ها و بسته به اندازه سطح آن ها تعیین گردید. نتایج به دست آمده نشان داد که با افزایش سطح حفره، تعداد نهال راش کاهش وبرعکس نهال های افرا افزایش یافت. در داخل حفره ها تعداد نهال ها از 4 تا 9 اصله در متر مربع، میانگین ارتفاع از 20 تا 100 سانتی متر و قطر یقه آنها از 4 تا 6 میلی متر در نوسان بود. در حفره های 2- 1 و 5-4 آری اندازه ارتفاع و قطر یقه نهال ها و در حفره های 2-1 آری میزان فراوانی نهال ها بزرگتر از آنها دردیگر حفره ها نشان داده می شد. از این مطالعه استنباط می شود که متغیرهای مطالعه شده زادآوری، از نظر استقرار و رشد، در حفره های بزرگتر (11-9 آر) محدود می گردند ولیکن در حفره های کوچکتر (2-1 و 5-4 آر) که عموماً برداشت عناصر به صورت تک درخت ممکن می گردد از شرایط مطلوب تری برخوردار می شوند. در حقیقت، این تحقیق توصیه می نماید که به منظور بهبود وضعیت تجدید حیاط طبیعی، مساحت نشانه گذاری برای برداشت تاج پوشش از طریق برش های نخستین پناهی (آمادگی و بذرافشانی) و نیز تک گزینی نبایستی از 5 آر تجاوز نماید.}, keywords_fa = {ارتفاع,راش,زادآوری طبیعی,سطح حفره,شیوه پناهی,شیوه تک گزینی,فراوانی,قطر یقه,نهال}, url = {https://ijnr.ut.ac.ir/article_17289.html}, eprint = {https://ijnr.ut.ac.ir/article_17289_442725919e90b721509854526829b4d9.pdf} }